Mill-Master Machine Specifications                                     
                                                          
Grinds o.d.'s and ends of standard end mills in one setup within a few minutes.
There are 9 different axes to work with for unlimited versatility.
1 machine grinds end mills, roughing end mills, carbide tools reamers, performs gashing
Extremely versatile and can be used for more than standard cutting tool - we've sold many machines to customers that have special applications.
The tools rest is a mitutoyo micrometer head and is infinitely adjustable for fine primary and secondary angle adjustment
Extremely easy to use - and fast! The machine is always set up and ready to go.
The Mill-Master is supplied standard with an Air Bearing Fixture.
The Jet Stream Air Bearing Fixture is precision honed and capable of grinding to close tolerances. The spindle sleeve is made from bronze and the spindle itself is chrome plated steel.
Air bearing has a 200 degree swivel base for taper grinding.
Takes standard 5c collets, with end mill holders available that can hold shank sizes up to 2".
Table is made from Granite and precision ground.
Motor comes standard with two spindles so
Motor/spindle assembly tilts to positive and negative angles; and rotates 360 degrees cutting tool clearance angles can be adjusted as needed.
Available in imperial graduations .0005.
Beautiful ground granite and powder coated black . Specifications:
Air bearing stroke - 10.5" (266mm)
Air bearing heigth over table adjustable from 4 to 6.5 inches
Cutting tool capacity - 2" shank, 9.8" O.D., 10.5" flute length
T-slot dimension - .800x.500x.670
Table feed graduations - .0005
X-Axis carrier travel - 9"  plus Manual adjustment of 6"
Y-Axis carrier travel - 9", plus manual adjustment of 6"
X-Axis table working space - 16.5"x5.5"
Y-Axis working space - 13"x5.5"
Wheel - 5" cup (or 6" dish with Z-axis), 1-1/4" arbor
Motor tilt - +20/-10 degrees
Motor - 1/2 hp, 3450rpm, 110V/60Hz or 220V/50Hz
Net weight - 180 pounds/106 kilos
Dimensions - 21"x20"x21" (not including handles)
Shipping dimensions - 30"x28"x29"

Optional accessories available

 Works with Darex Cuttermaster or Rush Radius Attachments - Sharpen ball or bull end mills and corner radii

With 9 axis there is an unlimited Capability to grind roughing end mills, perform gashing operations
 
 

                        This Thing Rocks, and there is nothing in the market like it

Reference Accounts

Reference 1

Description of services provided

Reference 2

Description of services provided

Reference 3

Description of services provided